configuration of phoenix awardbios cmos setup utility

#Configuration of phoenix awardbios cmos setup utility how to
#Configuration of phoenix awardbios cmos setup utility update
#Configuration of phoenix awardbios cmos setup utility windows 10

This can be done by pressing the ESC key during the booting when the Toradex logo appears. In this case, it is useful to boot temporary from a different device without changing the boot order setting in the BIOS. Maybe the system needs to be set to boot from the internal SSD but the DOS for getting the clone image is located on a USB drive. Warning: Do not used a cloned CMOS settings from Robin Z530 for Z510 modules and viceversa.

Run the TorFlash tool with the following option: TORFLASH clone.bin /nab /py /sn /qi /wb /cd /cc /cp.

Boot the clone system with the USB DOS stick.

Updating the Clone Systems with the Image Unfortunately, this example is not working.

#Configuration of phoenix awardbios cmos setup utility how to

Press N when the tool has finished saving the image and asks for programming the BIOS.Įxample 3 of the AwdFlash User Guide describes how to save the BIOS image to a file by using the option awdflash /pn oldbios.bin.Enter a name for the your BIOS image (e.g.Enter the file name of the provided Award BIOS image (e.g. Such a change is not done 'within' Windows 10. At the bottom of the menu are the control keys for use on this menu.

#Configuration of phoenix awardbios cmos setup utility windows 10

The tool asks for the file name to program. How to change bios phoenix from SATA to AHCI in windows 10 > Bios Phoenix Awardbios CMOS Setup Utility. You will need to run the Standard CMOS option, however, if you change your system hardware configurations, the onboard battery fails, or the configuration stored in the CMOS memory was lost or damaged.Boot the master system with the USB DOS stick and run the TorFlash (or AwdFlash) tool without any further options.Configure the BIOS settings of your master system according your needs.

#Configuration of phoenix awardbios cmos setup utility update

Update the BIOS of your master system with the latest Award BIOS according the update procedure description delivered with the BIOS image.Copy the TorFlash tool and the latest Award BIOS to the USB stick.Create a bootable USB stick with installed DOS or FreeDOS.Contact Toradex or for getting the latest Award BIOS and TorFlash or AwdFlash tools.

ENTERING SETUP Power ON the computer and press immediately will allow Setup.
This type of information is backed CMOS SRAM so that it retains the Setup information is turned off. This document describes how to clone the CMOS settings of your system. Award's BIOS ROM has a built-in Setup program that allows the basic system configuration. IMPORTANT: since the Woodpecker Z5xx and the Robin Z5xx do not have the same BIOS image, use the stored BIOS image only for equal module types. With this file, the BIOS of the clone systems can be flashed. The BIOS image including the backup CMOS settings of this system can be stored to a file.
Clone CMOS settings On a master system, the the CMOS settings are configured to the desired values.
If the battery is not present, the backup settings are restored from the flash.
Battery less operation If the RTC is not used, no backup battery is needed to store the CMOS settings.
The AWARD Phoenix BIOS for the Robin and Woodpecker Module saves the CMOS settings atomatically to the flash.